When it comes to heating and cooling your butt and pass log home there are lots of traditional options that you can use but it is very important to first consider and plan the orientation of your home (passive solar design) and consider other options such as slopes and trees.
A huge amount of money can be saved if you build your butt and pass log home in a good location. Here I give you some pointers on the importance of home orientation.
Simply the correct orientation can help keep a house warm and cool
How a house is oriented to the sun has a dramatic impact on heating and cooling costs — the largest energy load in most homes.
As promising as photo-voltaic (P.V.) and solar hot water collectors are for reducing our reliance on fossil fuels, passive solar design alone can lower heating costs tremendously. Much of the reduction is available without spending an extra dime.
The sun moves, but houses stay put
The sun is a lot higher in the sky in summer than in winter. You can use overhangs and trees to block the sun’s heat in summer. In the winter, when you want the benefit of the sun’s warmth, the sun’s rays shine below the overhangs and the leaves are gone from the trees.
ABOUT PASSIVE HEATING AND DAYLIGHTING
Start your design with a compass.
Think about how the sun moves through the day and through the year when you start designing your floor plan. Selective siting, shading, and construction strategies can save money on lighting and heating bills. Also, a house with plenty of natural light is more pleasant to be in.
Design floor plans to use sun all day long. Think of a house as four distinct quadrants, each with its own potential for daylight and free heat, depending on the sun’s position during the day.
Morning sun is dominant in east-facing rooms. Locating the dining room or breakfast nook and the kitchen on the east wall makes the most of light potential early in the day. It’s also a good place for a dense floor that can soak up some solar heat for the day. Bedrooms with east-facing windows will be great for early risers but terrible for people who like to sleep in.
Sunlight is strongest on the south wall. This is the right quadrant for the living room and other spaces that will be used throughout the day. For heat gain, rooms with south-facing windows are another good choice for dense materials like stone, brick, or concrete.
Early evening light from the west is at a low angle. Because the sun is so low in the sky, west-facing windows get direct sunlight blazing through them. This makes west-facing rooms a bad choice for TV rooms because strong light makes screens harder to see.
In cold areas, this is the last chance of the day to soak up some sun; in hot areas, it’s the most important window to shade with trees. A west bedroom is good for people who like to sleep in because the room is very dark in the morning.
North rooms have the least natural light. They also have the greatest potential for heat loss through windows. This is a good place for bathrooms, utility rooms, entries, and other rooms where natural light isn’t as important. That said, painters and artisans might appreciate generous north-facing windows because of the quality of the light.
Of course, cooling a house can be expensive, too.
The sun’s orientation is just as important for houses built in the Sunbelt, where controlling heat gain in the summer lowers cooling costs and creates a more comfortable indoor environment.
You can lessen temperature swings in houses in all climates by using dense materials in key areas. Siting a house thoughtfully can make these areas inviting rooms.
MORE ABOUT DAYLIGHTING
Find other ways to let in light.
Not every room in a house can have generously sized windows that admit natural light. Rooms at the interior core of a house as well as those facing north sometimes get shortchanged.
Open floor plans allow light from skylights and windows to penetrate deep into a house. Skylights over stairways, for example, can bring light into the center of a house.
Skylights are a simple way of introducing light to rooms right below roof level. Both fixed and operable skylights are available.
Angled (splayed) walls broadcast the most light, and placing skylights near a wall creates a pleasant light-washing effect on the wall surface.
Skylights have a negative trade-off, however: a high potential for energy loss because even the best have a higher U-factor (lower R-value) than well-insulated walls and ceilings.
Skylights also can produce unexpected glare and uncomfortably warm indoor temperatures unless they have shades. With this in mind, in most climates it is wise to limit skylights to north roof slopes. At least consider the path of the sun throughout the day when picking skylight locations.
Tubular skylights incorporate a plastic, roof-mounted dome, a highly reflective rigid or flexible tube, and a light diffuser mounted in the ceiling. As long as there is good attic access, a tubular skylight can be easily installed in most existing homes. Tubular skylights are expensive replacements for light bulbs, but they offer natural light over artificial light, and you won’t waste energy if you leave the “light” on. They’re a good option for dark interior spaces like bathrooms.
Ridge skylights, dormers, and clerestories can add natural light to interior spaces where windows are not an option or where more natural light is desired. A clerestory—a band of windows installed between the ridge of an upper shed roof and the ridge of a lower shed roof—can throw light far into a room. Operable windows improve air circulation.
Light shelves, located directly below skylights or clerestories, bounce light back toward the ceiling and provide good indirect lighting to a large room. Light shelves can also block glare from overhead sun when skylight placement options are limited.
Consider interior colors, too. Light colors reflect light more easily than darker shades. Interiors painted in light colors will feel larger and brighter, and make it easier to use daylight as task lighting.
A FEW DAYLIGHTING STRATEGIES TO CONSIDER:
Place a house on the site so that light is managed easily.
Let light in by angling the house properly, using trees or awnings to shade the windows during the heat of the day, and sizing the overhangs to admit winter light while blocking the hot summer sun.
To balance light, shape the house so that light can enter every room from at least two sides.
Four-square styles are a traditional way of evenly admitting light. Adding a courtyard, atrium, or skylight can illuminate an interior from above. Also, an H- or C-shaped house offers many rooms that can let light in from two sides. There are trade-offs to consider, however; H- and C-shaped houses are less compact, and therefore less energy efficient, than compact rectangular houses.
Where light from a second side isn’t possible, provide light from above.
Skylights and clerestory windows are two ways to sneak light in from up high. There are many ways to bounce that light around to dim corners such as light shelves and flared skylight shafts. Remember, though, that skylights are a weak link in a home’s thermal envelope, and should therefore be used sparingly.
Shape and locate each opening to suit both the climate and the room.
Does the space need bright task lighting or warm ambient light? Are the windows more important for lighting or solar heat gain? Would large windows be a liability in an otherwise well-insulated space? Such questions that require careful evaluation of the site conditions and the home’s needs.
Designing for daylighting has its own unique issues
Pay attention to critical areas: kitchen, office, reading area. In many households, the occupants are gone for a large part of daylight hours. This, combined with the fact that code requires regularly inhabited spaces in the home to have windows, may mean that “design as usual” will provide adequate results for daylighting purposes. Areas that may benefit from more attention are those where critical visual tasks take place — kitchen workspaces, offices, hobby and reading areas. Other daylighting opportunities not to overlook include utility rooms and walk-in closets. In these spaces, quality daylighting can significantly reduce the need for artificial lighting. “Solar tubes” (narrow, tubular skylights) may be particularly useful in these types of locations.
Existing landscape can affect how well your site design works for your house.
Drainage patterns of a site can affect landscape choices and foundation durability.
MAKE IT GREENER
Shade walls with roof overhangs
Direct sun eats up siding faster than anything else. Even small roof overhangs provide shelter for walls, and deep overhangs can shelter the whole wall.
Collect sun, block sun
In hot climates, use deciduous trees to shade summer heat while letting some winter heat in. Roof overhangs can do the same job if designed with the sun’s seasonal path in mind.
Windows mean free heat and light, but they also amount to a big hole in the wall that must be leak-free. Problem is, many windows aren’t leak-free.
Skylights can bring daylight into dark interior rooms, but like windows, they too can amount to leak-prone holes — in the roof! They also let in unwanted heat in the summer.
Window placement should work well inside and look good outside. The balance between what looks good inside and what looks good outside matters because people tend not to take care of unattractive houses.
Sunlight can affect a thermostat, a good thing to keep in mind when deciding where to install them. A thermostat will do a better job of regulating indoor temperatures when it is kept out of direct sunlight and placed in a central location.